Smoke and Smoke Detectors

Smoke
We’ve all seen the movies where the hero enters a burning building to rescue someone. Flames are everywhere and there's not very much smoke. The hero storms from room to room, standing straight up and looks through the flames for the victim. He finds the victim easily enough, picks her up in his arms and runs out of the house...a hero.

Unfortunately, that is a long shot from the way it really is. Unless an arsonist has set several fires, there is usually only one point of origin for a fire. That one point could smolder for quite some time. Even after flames flare, a tremendous amount of smoke is generated. In a realistic situation, our hero would rush into a burning building and find a room thick with black, toxic smoke. Visibility would be zero. He may not even see any flames because there would be so much smoke. If he were standing straight up as he entered the building, he would probably fall down unconscious in a matter of seconds because he would be inhaling that poisonous smoke. Movie producers would run out of heroes quickly.

Smoke Rises
In a fire, heat rises. Therefore, smoke rises. In the early stages of a structure fire, it is very common for smoke to accumulate near the ceiling. That is why smoke detectors are always placed high on a wall or ceiling. They detect the first signs of smoke, which rises to the top of the room. Firefighters know this and that is why, when they enter a burning building, they are down on their hands and knees. There is far less smoke near the floor and the visibility is much better.

Smoke Inhalation can be Fatal
In most cases, fire fatalities result from victims who have succumbed to smoke inhalation long before burn injuries occur. Eighty percent of those who die in residential fires have first inhaled smoke and other toxic gases.

Fire produces many gases that are highly poisonous. These are found in smoke and include carbon monoxide, sulfur dioxide, hydrogen cyanide and hydrogen sulfide. They displace oxygen in the room, which can cause suffocation.

Fire also consumes oxygen. This reduces the amount of oxygen available for persons to breathe. When a person is exposed to the toxins of smoke, muscle control is lost, judgment is impaired and the ability to reason diminishes. At a time when a fire emergency is present, it is important to be able to make quick decisions. Yet, the toxic gases, superheated air, smoke and limited visibility may cause someone to act in an inappropriate or irrational manner. It is vital to recognize smoke in the home and be able to quickly escape by crawling low under smoke.

Drop and Crawl
When you are caught in a building with smoke, drop to your hands and knees and begin crawling to the nearest exit.

If you come to a closed door, don't open it before testing it for heat. Place the back of your hand against the door. If it is hot, don't open it. Turn around and seek another exit. If it is not hot, slowly open it but be prepared to slam it closed again if you should encounter flames.

Continue to crawl until you get outside. You may have to use the walls of the building to help you. Just place your shoulder against the wall and keep crawling with your shoulder against the wall. By doing so, you will reduce your chances of getting lost in the smoke.

The best plan is to have a pre-arranged meeting place outside the house where everyone should meet and be accounted for.

Smoke Detectors
Smoke detectors are devices that are mounted on the wall or ceiling and automatically sound a warning when they sense smoke or other products of combustion. When people are warned early enough about a fire, they can escape before it spreads. Prices start at about $6 and up. Find out if you qualify for a free smoke detector at (760) 323-8186.

Every year thousands of people die from fires in the home. Fire kills an estimated 4,000 Americans every year. Another 30,000 people are seriously injured by fire each year. Property damage from fire costs us at least $11.2 billion yearly. Most fire victims feel that fire would "never happen to them."

Although we like to feel safe at home, about two-thirds of our nation's fire deaths happen in the victim's own home. The home is where we are at the greatest risk and where we must take the most precautions. Most deaths occur from inhaling smoke or poisonous gases, not from the flames.

Most fatal fires occur in residential buildings between 11 p.m. and 6 a.m. when occupants are more likely to be asleep. More than 90 percent of fire deaths in buildings occur in residential dwellings.

A Johns Hopkins University study, funded by the United States Fire Administration, found that 75 percent of residential fire deaths and 84 percent of residential fire injuries could have been prevented by smoke detectors.

The City of Palm Springs requires that all residential occupancies have smoke detectors and requires that smoke detectors are functioning and tested by Fire Dept. personnel prior to close of escrow on new and resold occupancies.

There are two basic types of smoke detectors:

1. Ionization detectors - Ionization detectors contain radioactive material that ionizes the air, making an electrical path. When smoke enters, the smoke molecules attach themselves to the ions. The change in electric current flow triggers the alarm. The radioactive material is called americium. It's a radioactive metallic element produced by bombardment of plutonium with high-energy neutrons. The amount is very small and not harmful.

2. Photo-electric detectors - These types of detectors contain a light source (usually a bulb) and a photocell, which is activated by light. Light from the bulb reflects off the smoke particles and is directed towards the photocell. The photocell then is activated to trigger the alarm.

Choosing a smoke detector
When choosing a smoke detector, there are several things to consider. Think about which areas of the house you want to protect, where fire would be most dangerous, how many you will need, etc.

The Palm Springs Fire Department recommends that every home have a smoke detector outside each sleeping area (inside as well if members of the household sleep with the door closed) and on every level of the home. The National Fire code requires a smoke detector inside each sleeping area for new construction. On floors without bedrooms, detectors should be installed in or near living areas, such as dens, living rooms or family rooms. Smoke detectors are not recommended for kitchens.

The safest bet is to have both kinds and a combination detector with a battery back up. Be sure to check for a testing laboratory label on the detector. It means that samples of that particular model have been tested under operating conditions. Check to see if it is easy to maintain and clean. Be sure bulbs and batteries are easy to purchase and convenient to install.

Installation
The placement of smoke detectors is very important. Sleeping areas need the most protection. One detector in a short hallway outside the bedroom area is usually adequate. Hallways longer than 30 feet should have one at each end. For maximum protection, install a detector in each bedroom.

Be sure to keep the detector away from fireplaces and wood stoves to avoid false alarms. Place smoke detectors at the top of each stairwell and at the end of each long hallway. Smoke rises easily through stairwells. If you should put a smoke detector in your kitchen, be sure to keep it away from cooking fumes or smoking areas.

Proper mounting of a smoke detector also is important. You can mount many detectors by yourself, but those connected to your household wiring should have their own separate circuit and be installed by a professional electrician. If you mount your detector on the ceiling, be sure to keep it at least 18 inches away from dead air space near walls and corners. If you mount it on the wall, place it six to 12 inches below the ceiling and away from corners. Keep them high because smoke rises.

Never place them any closer than three feet from an air register that might recalculate smoke. Don't place them near doorways or windows where drafts could impair the detector operation. Don't place them on an uninsulated exterior wall or ceiling. Temperature extremes can affect the batteries.

Maintenance
Keeping smoke detectors in good condition is easy. Always follow the manufacturer's instructions. Be sure to replace the batteries every year or as needed. Most models will make a chirping, popping or beeping sound when the battery is losing its charge. When this sound is heard, install a fresh battery, preferably an alkaline type.

Replace bulbs every three years or as needed. Keep extras handy. Check the smoke detector every 30 days by releasing smoke or pushing the test button. Clean the detector face and grillwork often to remove dust and grease. Never paint a smoke detector, as it will hamper its function. Check your detector if you've been away from home.

If you're looking for a novel gift for somebody, consider giving them a smoke detector. It's an interesting gift that can save lives and it shows that you care.